EGURO -With an eye to the changes that come with time, taking on the challenge of developing products that are one step ahead.

Product introduction

Special purpose machine per market
Eguro names the machines, which are specially made as per the customers'request, Special Purpose Machines per Market. 
   Those are RL series for the mirror finish turning of the outer diameters of drams for copy machines, BS series for the simultaneous turning of the both ends of
   shafts or pipes, and others of quite custom made which do not appear in catalogue.

OPC drum finishing lathe
RL-450

Tailstock cylinder specification, Dedicated machine of drum outer diameter finishing.

Specifications

 
Capacity φ100(Max diameter)×450(Max length)mm
Spindle speed Max.6,000min-1(Step-less S4 digits direct command)
Slide travel X axis:130mm Z axis:550mm
Travel of the tailstock 100mm
Rapid traverse X axis:5 Z axis:10(m/min)
Floor space 2,290mm(W)×1,740mm(L)
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

OPC drum finishing lathe
RL-550EX

Tailstock servo specification, Dedicated machine of drum outer diameter finishing.

Specifications

 
Capacity φ120(Max diameter)×550(Max length)mm
Spindle speed Max.6,000min-1(Step-less S4 digits direct command)
Slide travel X axis:90mm Z aixs:700mm
Travel of the tailstock 400mm
Rapid traverse X axis:5 Z axis:15(m/min)
Floor space 2,400mm(W)×1,100mm(L)
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

OPC drum finishing lathe
RF-400

Dedicated machine of drum outer diameter finishing with balance cut-axis.

Specifications

 
Capacity φ60(Max diameter)×400(Max length)mm
Spindle speed Max.6,000min-1(Step-less S4 digits direct command)
Slide travel X1/X2 axes:100mm Z1/Z2 axes:450mm
Travel of the tailstock 250mm
Rapid traverse X1/X2 axes:10 Z1/Z2 axes:15(m/min)
Floor space 2,280mm(W)×1,450mm(L)
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Magnet sleeves outer diameter turning lathe
RS-100

Magnet sleeves outer diameter turning lathe

Specifications

 
Capacity φ100(Max diameter)×400(Max length)mm
Spindle speed Max.5,000min-1(Step-less S4 digits direct command)
Slide travel X axis:65mm Z axis:470mm
Travel of the tailstock 70mm
Rapid traverse X axis:12 Z axis:12(m/min)
Floor space 1,900mm(W)×1,020mm(L)
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Large size drum turning lathe
SR-600

Large size correspondence of drum outer diameter finishing machine.

Specifications

 
Capacity φ300(Max diameter)×600(Max length)mm
Spindle speed Max.5,000min-1(Step-less S4 digits direct command)
Slide travel X axis:120mm Z axis:600mm
Travel of the tailstock 350mm
Rapid traverse X axis:15 Z axis:20(m/min)
Floor space 2,750mm(W)×1,200mm(L)
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Dedicated machine of drum outer diameter finishing with turret.
SD-550

Dedicated machine of drum outer diameter finishing with turret.

Specifications

 
Capacity φ100(Max diameter)×550(Max length)mm
Spindle speed Max.6,000min-1(Step-less S4 digits direct command)
Slide travel X axis:150mm、Z axis:600mm
Travel of the tailstock 50mm
Rapid traverse X axis:15 Z axis:20(m/min)
Floor space 2,350mm(W)×1,500mm(L)
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Magnet

Magnet roller outer turning lathe with turret.

Specifications

 
Capacity φ60(Max diameter)×400(Max length)mm
Spindle speed Max.10,000min-1(Step-less S5 digits direct command)
Slide travel X axis:100mm Z axis:450mm
Travel of the tailstock 250mm
Rapid traverse X axis:10 Z axis:15(m/min)
Floor space 2,280mm(W)×1,450mm(L)
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Both ends simultaneous turning lathe
BSS-Series 

The right and left slides driven by NC simultaneously turn the both ends of the shafts or pipes of diamater up to 30mm by one chucking.

Specifications

 
Item Description
Capacity Workpiece diameter mm Max.φ30 Min.φ10
Workpiece lingth Max.330 Min.220
Spindle Speed min-1 Max.4,000
Slide Number of slide   2
Trsvel(Left and right) mm X axis:150 Z axis:150
Rapid traverse        m/min 12
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Both ends simultaneous turning lathe
BSM-Series 

The loader is moved with NC control. The machine simultaneouly turn the both ends of the shafts or pipes of diameter up to 50mm.

Specifications

 
Item Description
Capacity Workpiece diameter mm Max.φ50 Min.φ10
Workpiece lingth Max.400 Min.220
Spindle Speed min-1 Max.4,000
Slide Number of slide   2
Trsvel(Left and right) mm X axis:150 Z axis:150
Rapid traverse        m/min 15
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Both ends simultaneous turning lathe
BSZ-Seires

The machine simultaneouly turn the both ends of the shafts or pipes of diameter up to 100mm.
Used at the both sides of the spindle head stock are collets. Work is turned. The right and left slides driven by NC machine the work.

Specifications

 
Item BSZ-380
(380S)
BSZ-600
(600S)
BSZ-800 BSZ-1000
Capacity Workpiece diameter Max. mm φ38 φ60 φ80 φ100
  Min. φ20 φ20 φ40 φ60
Workpiece lingth Max. 400(350) 420 500
  Min. 270(220) 270 270
Spindle Speed min-1 500~4,000 Max.3,000
Slide Number of slide   2
Trsvel(Left and right) mm X axis:260 Z axis:200
Rapid traverse m/min   20
NC contril unit   FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Both ends simultaneous 3 axes turning lathe
BSF-A3

From bar to shaft. Changing in the shaft turning.

Specifications

 
Item Description
Capacity Workpiece diameter Max. mm φ30
 
Workpiece lingth Max. 400
Spindle Command   (Step-less S4 digits direct command)
Speed min-1 Max.8,000
Slide Trsvel mm X axis:160
Y axis:280
Z axis:150
Rapid traverse mm/min X axis:15
Y axis:15
Z axis:15
Jog feed rate mm/min 0~1,260
    
        
Number of tools   Each slide:Max 5 tools
Number of slide   2
Type pf tooling   Gang turret,tool fixed(Horizontal and vertical type)
Motor Spindle   2.2(FANUC αB112SS/2000i)
Slide X axis kw 1
Y axis 1
Z axis 2.7
Power electricity kva 14(8kw)
      
   
     
mm/min
Machine height mm/min 1.870
Floor space
mm/min 1,730(W)×1,240(L)
NC contril unit kg FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Both ends simultaneous turning lathe
BSF-A4

From bar to shaft. Changing in the shaft turning.

Specifications

 
Item Description
Capacity Workpiece diameter Max. mm φ25
Min. φ5
Workpiece lingth Max. 300
Min. 220
Spindle Command   (Step-less S4 digits direct command)
Speed min-1 Max.8,000
Slide Trsvel mm X axis:80
Y axis:150
Z axis:150
Rapid traverse mm/min X axis:8
Y axis:10
Z axis:15
Jog feed rate mm/min 0~1,260
Tool
Tool size
mm 12
Number of tools   >Each slide:Max 5 tools
Number of slide   2
Type pf tooling   Gang turret,tool fixed(Horizontal and vertical type)
Motor Spindle   2.2(FANUC αB112SS/2000i)
Slide X axis kw 1
Y axis 1
Z axis 2.7
Power electricity kva 14(8kw)
Center height

mm/min 911
Machine height mm/min 1.870
Floor space
mm/min 1,730(W)×1,240(L)
NC contril unit kg FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Both ends simultaneous turning lathe
BSK-300 

The right and left slides driven by NC simultaneously turn the both ends of the shafts or pipes of diamater up to 30mm. This machine is well prepared for tool tip coolant.

Specifications

 
Item Description
Capacity Workpiece diameter mm φ30   
Workpiece lingth 330 
Spindle Speed min-1 Max.4,000
slide Number of slide   2
Trsvel(Left and right) mm X axis:150 Zaxis:150
Rapid traverse        m/min 12
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Short bar both ends simultaneous turning lathe
SBS-100F

Newly developed spindle turns the both ends of short bar. Unmanned cell with simple loader using the slide.

Specifications

Item Description
Capacity Minφ6×Min.110(mm)
spindle Speed min-1 Max.5,000
Spindle command   (Step-less S4 digits direct command)
Spindle nose   Dedicated collet specification
Slide Type   Vertical liner turret
Trsvel mm X axis:80
mm Y axis:150
mm Z axis:150
Rapid traverse m/min X axis:8 Y axis:10
m/min Z axis:15
Number of tools   Each slide:Max 5 tools
Motor Spindle kw 2.2
NC contril unit     FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Both ends centering machine
UB-300LC 

Work is clamped. The both ends of pipes are simultaneously machined by rotary tools.
Both ends centering machine

Specifications

 
Item Description
Capacity Workpiece diameter mm Max.φ30   
Workpiece lingth Max.400 
Slide type   Tool holder of left and right slide
Spindle axis Speed min-1 Max.4,000
Slide Number of slide   2(Left and right:Each 1)
Trsvel(Left and right)Z axis mm 170
Rapid traverse Y axis     m/min 12    
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Both ends centering machine
UB-700 

Work is clamped. The both ends of pipes are simultaneously machined by rotary tools.
Both ends centering machine

Specifications

 
Item Description
Capacit Workpiece diameter mm Max.φ60 Min.φ24
Workpiece lingth Max.370 Min.250
Slide type   Tool holder of left and right slide
Spindle axis Speed min-1 Max.6,000
Slide Number of slide   2(Left and right:Each 1)
Trsvel(Left and right)Z axis mm 170
Motor Slide motor kw 0.35 2P-2 set
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Shaft one end turning lathe ARROW-8

Shaft one end turning lathe

Specifications

 
Capacity Minφ5~20mm
Spindle Spindle nose EDA-8
>Spindle command・Speed (Step-less S4 digits direct command)・Max.4,000min
Slide Trsvel X axis:230mm
  Z axis:200mm
Rapid traverse X axis:15m/min
Z axis:15m/min
Slide Number of slide:1
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

NC roulette lathe RGS-200

Roulette and turning, complex machining.

Specifications

 
Capacity Max.φ100×150mm(Maximum of knurling tool:75mm)
Spindle Motor Synchronous built-in motor
Speed Max.3,000min-1
Slide Travel X axis:300mm
  Z axis:150mm
Rapid traverse X axis:10m/min
Z axis:30m/min
c axis Minimum indexing:0.001
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Ceramic raw material turning CNC lathe ECOLA

The driving room is separate from the machining room. CNC lathe best suit to the turning of raw ceramics.

Specifications

 
Capacity Swing over bed 460mm
Spindle Spindle nose φ100 flat type
Speed Max.8,000min-1
Slide Travel X axis:260mm
  Z axis:150mm
Rapid traverse X axis:15m/min
Z axis:15m/min
Type of slide Gang turret slide
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Ultra precision gang turret CNC lathe 100-nano

For the hightst accuracy 0.1μm command execution.

Specifications

 
Capacity Swing over bed 250mm
Spindle Spindle nose φ190 Flat type
Speed Max.5,000min-1
Slide Travel X axis:200mm
  Z axis:125mm
Rapid traverse X axis:5m/min
Z axis:5m/min
Type of slide Gang turret slide
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Back oriented 2 spindle CNC lathe B-ART-100

Two spindles are composed in parallel, up side down, vertical lathe, for the 2nd operatiopn of forged parts. By these two spindles, loading and unloading time has become zero. The machine can become the base of the cell for automatic operation.

Specifications

 
Capacity Max.φ20mm
Spindle Spindle nose Rego fix ER32×2 spindles
Speed Max.6,000min-1×2 spindles
Slide Travel X axis:200mm
  Z axis:150mm
Rapid traverse X axis:12m/min
Z axis:12m/min
Type of slide Gang turret slide
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Y axis slide control CNC lathe

The spindle is mounted on the X, Z slides. Tools are on the Y slide. 2 axes + 1 axis control CNC lathe.

Specifications

Capacity Max.φ100×80mm
Spindle Spindle nose φ100 Flat type
Speed Max.8,000min-1
Slide Travel X axis:260 Z axis:150(mm)
  Y axis:170mm
Rapid traverse X axis/Z axis:12m/min
Y axis:12m/min
Type of slide Gang turret slide
NC contril unit FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP