- > PLANET CENTER E-32v/E-43v
- > Multi-facial 5 axis small machining center E-32v LC
- > PLANET CENTER E-32vDX
One chuck machining of the multi faces of work by 5 axes control.
A uniue multi faces machining center with original ideas.
■Trunnion type table mounted directly on the base
■Symmetrically designedagainst heat.(E-43v left and right heat symmetry)
■Compact design
■Easy operation,accessability
| Item | E-32vEX | E-43v | |
| Spindle travel | X axis | 300mm | 370mm |
| Y axis | 200mm | 320mm | |
| Z axis | 220mm | 320mm | |
| Table | Working are on the table | 250mm×250mm | 315mm×315mm |
| Trunnion turning | 0～-95°(0.001°Arbitrary) | +10°～-100°(0.001°Arbitrary) | |
| Table turning | ±360°(0.001°Arbitrary) | ±360°(0.001°Arbitrary) | |
| Spindle | Tool mounting hole | 7/24 Taper JIS No.30 |
7/24 Taper JIS No.40 |
| Speed | Max.15,000min-1 | Max.10,000min-1 | |
| Spindle motor (32v:Motor direct connection/43v:Built-in) |
2.2/3.7kw | 3.7/5.5kw | |
| Axis Feed | Cutting feed rate | X/Y/Z 5,000 mm/min |
X/Y 8,000mm/min Z 6,500mm/min |
| Rapid traverse speed | X/Y 20 m/min Z 20m/min |
X/Y 24mm/min Z 20m/min |
|
| ATC | Tool shank type | BT30 | BT40 |
| Number of tools | 24 tools(OP:40/60tools) | 24 tools(OP:36 tools) | |
| Tool selection | Fixed address Random access |
Fixed address Random access |
|
| NC contril unit | FANUC 31i-B5 | FANUC 31i-B5 | |
A new trend of the best seller machining center E-32v of 5 axes simultaneous control. Price is reduced but high accuracy and ease of use is kept unchanged. The very best 5 axes machining center for the customer for the first use of 5 axes machining center.
| Item | E-32v LC | |
| Spindle travel | X axis | 300mm |
| Y axis | 200mm | |
| Z axis | 220mm | |
| Table | Working are on the table | 250mm×250mm |
| Trunnion turning | 0～-95°(0.001°Arbitrary) | |
| Table turning | ±360°(0.001°Arbitrary) | |
| Spindle | Tool mounting hole | 7/24 Taper JIS No.30 |
| Speed | Max.12,000min-1 | |
| Spindle motor (Motor direct connection) |
3.7/5.5kw | |
| Axis Feed | Cutting feed rate | X/Y/Z 5,000 mm/min |
| Rapid traverse speed | X/Y 20 m/min Z 20 m/min |
|
| ATC | Tool shank type | BT30 |
| Number of tools | 24 tools(OP:40 tools) | |
| Tool selection | Fixed address Random access |
|
| NC contril unit | FANUC 0i-MD | |
Appearance of constant spindle speed 20,000 min-1 in the simultaneous 5 axes machining center Planet Center-Seres
| Item | E-32v DX | |
| Spindle travel | X axis | 300mm |
| Y axis | 200mm | |
| Z axis | 220mm | |
| Table | Working are on the table | 250mm×250mm |
| Trunnion turning | 0～-95°(0.001°Arbitrary) | |
| Table turning | ±360°(0.001°Arbitrary) | |
| Spindle | Tool mounting hole | BBT-30 |
| Speed | Constant speed(Max)20,000min-1 | |
| Spindle motor (Built-in motor) |
7.5kw | |
| Axis Feed | Cutting feed rate | X/Y/Z 5,000 mm/min |
| Rapid traverse speed | X/Y 20 m/min Z 20 m/min |
|
| Number of tools | 24 tools(OP:40/60 tools) | |
| Tool selection | Fixed address Random access |
|
| NC contril unit | FANUC 31i-B5 | |
