EGURO -With an eye to the changes that come with time, taking on the challenge of developing products that are one step ahead.

Product introduction

3 axes vertical gang turret CNC lathe
With vertical type linear turret, the strokes of the slides can be minimized.

Vertical gang turret CNC lathe
SANAX-6

3 axes gang tooling lathe. Tools are set on the vertical Y axis. By this,the travel of the horizontal X and Z slides can be minimized and the very compact machine of high accuracy has appeared.

Specifications

Item Description
Capacity Max.φ30×100
Spindle Speed min-1 Max 12,000
Spindle nose   EDA-6
Size of collet mm φ15
Slide Type of slide   Vertical linear turret
Travel mm X axis:40
mm Y axis:100
mm Z axis:150
Rapid traverse m/min X・Y axes:8
m/min Z axis:15
Number of tools   Max.10
Motor Spindle kw 1.2/1.0
NC contril unit     FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Counter 2 spindle 3axes CNC lathe
SANAX-8

To the SANA series of 3 axes control CNC lathe, SANAX-8 with face to face 2 spinldes is added. With SANAX-8, the specification of the sub spindle is raised. Accordingly the two spinldes can turn at high speed synchronously. as the first and the second spinlde. Works which cannot supported by center because of its little rigidness, and those, the turned dimension of which are unstable because of interrupted cutting, can be machined at high speed in high accuacy, free from deflection thanks to the synchronous turning of the two spindles supporting it at its both ends.

Recommended options
7 set consecutive tool holder(□12)

Specifications

 
Item Description
Capacity mm Max.φ40×250
First spindle Spindle nose type   Collet chuck
Change of speed   Step-less S4 digits direct command
Speed min-1 Max.5,000
First spindle
Spindle nose
Collet series mm EDA-8
Size of collet   Max.φ20
Body diameter   25
Second spindle Spindle nose type   Collet chuck
Change of speed   Step-less S4 digits direct command
Speed min-1 Max.5,000
Second spindle
Spindle nose
Collet series mm EDA-8
Size of collet   Max.φ20
Body diameter   25
First spindle
Second spindle
Distance between the centers mm 320
Synchronous speed min-1 Max.5,000
Synchronized phase difference   Start 4 deg./Continuous running 0.4 deg.
Synchronization   Phase,Speed
Slide Type of slide   Vertical linear turret
Travel mm X axis:60
Y axis:170
Z axis:300
A axis:350
Rapid traverse m/min X axis:10
Y axis:12
Z axis:15
A axis:10
Number of tools   Max.10
Motor First spindle kw 2.2/1.2
Second spindle 1.0/1.2
NC contril unit   FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Vertical gang turret CNC lathe
SANAX-10

FULL-TASK NC, by which Eguro means technology to machine works to the finish in one machine. SANAX-10 is developed as the base machine for that. One more machining in addition to the conventional complex machining of turning and milling can be done by this machine. Rotary unit, not to mention, grinding unit or circular unit can be mounted. This machine is the best suited to the Full Task NC machining.

Eguro will present the optimum machine, with various kinds of units replying to the ustomers' needs,
Two consecutive drill and tap unit Quick change holder

Specifications

 
Item Description
Number of tools Outer diameter tool holder mm □16×5(□12×7)
Inner diameter tool holder φ25×5
Capacity Max.φ80×60
Spindle Change of speed   Step-less S4 digits direct command
Speed min-1 Max.5,000
    
Size of collet mm Max.25.5
Spindle nose   EDA-10
Slide Travel
  
         
mm X axis:80
Y axis:170
Z axis:300
 
Rapid traverse
  
         
m/min X axis:10
Y axis:12
Z axis:15
 
Jog feed rate m/min 0~1,287
Number of tools   Max.10
Type of slide   Vertical linear turret
Motor Spindle kw 3.7/2.2
Slide
  
       
  
X axis 2.5
Y axis 2.5(with brake)
Z axis 2.7
 
Electricity kva 17
Center height mm 920
Machine height mm 1,525
Floor space mm 1,625×1,095
Machine weight kg 1,800
NC contril unit   FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Counter 2 spindle 3axes CNC lathe
SANATURN-6

To the SANA series of 3 axes control CNC lathes, SANATURN-6,face to face two spindles machine, is added. As the most compact complex machining lathe in the machine tool industry, SANATURN-6 will bring the highest productivity per unit area.

Specifications

 
Item Description
Capacity mm Max.φ30×120
First spindle Spindle nose type   Collet chuck
Change of speed   Step-less S5 digits direct command
Speed min-1 Max.12,000
First spindle
Spindle nose
Collet series mm EDA-6
Size of collet   Max.φ15
    
Second spindle Spindle nose type   Collet chuck
Change of speed   Step-less S4 digits direct command
Speed min-1 Max.5,000
Second spindle
Spindle nose
Collet series mm EDA-3
Size of collet   Max.φ6
    
    
   
    
Synchronous speed min-1 Max.5,000
Synchronization   Phase,Speed
Slide Type of slide   Vertical linear turret
Travel mm X axis:50
Y axis:100
Z axis:150
A axis:150
Rapid traverse m/min X axis:8
Y axis:8
Z axis:15
A axis:5
Number of tools   Max.7
Motor First spindle kw 1.2/1.0
Second spindle 0.4
NC contril unit   FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Ultra compact auto lathe with non-traveling spindle head
SANATURN-6B

All in one type ultra compact auto lathe with non-traveling spindle head.

Specifications

 
Item Description
Capacity mm Max.φ15
>First spindle Spindle nose type   Collet chuck
Change of speed   Step-less S5 digits direct command
Speed min-1 Max.12,000
First spindle
Spindle nose
Collet series mm EDA-6
Size of collet   Max.φ15
    
Second spindle Spindle nose type   Collet chuck
Change of speed   Step-less S4 digits direct command
Speed min-1 Max.5,000
Second spindle
Spindle nose
Collet series mm EDA-3
Size of collet   Max.φ6
    
    
   
    
Synchronous speed min-1 Max.5,000
Synchronization   Phase,Speed
Slide Type of slide   Vertical linear turret
Travel mm X axis:50
Y axis:100
Z axis:150
A axis:150
Rapid traverse m/min X axis:8
Y axis:8
Z axis:15
A axis:5
Number of tools   Max.7
Motor First spindle kw 1.2/1.0
Second spindle 0.4
NC contril unit   FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Counter 2 spindle 3axes CNC lathe
SANATURN-10

SANATURN-10, with face to face two spindles of standard specification, has beed added to the line of 3 axes control lathes SANA-sereis. The 2 spindles turn at high speed synchronously. Eguro's proposal ofinnovation and high efficiency for machining thelong size works.

Specifications

 
Item Description
Capacity mm Max.φ80×250
First spindle Spindle nose type   φ100 Flat type
Change of speed   Step-less S4 digits direct command
Speed min-1 Max.5,000
First spindle
Spindle nose
Collet series mm EDA-10
>Size of collet   Max.φ25.5
    
Second spindle Spindle nose type   φ100 Flat type
Change of speed   Step-less S4 digits direct command
Speed min-1 Max.5,000
Second spindle
Spindle nose
Collet series mm EDA-10
Size of collet   Max.φ25.5
    
    
   
    
Synchronous speed min-1 Max.5,000
Synchronization   Phase,Speed
Slide Type   Vertical linear turret
Travel mm X axis:100
Y axis:150
Z axis:300
A axis:300
Rapid traverse m/min X axis:10
Y axis:12
Z axis:15
A axis:10
Number of tools   Max.7
Motor First spindle kw 2.2/3.7
Second spindle 2.2/3.7
NC contril unit   FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP

Highly accurate linear turret complex machining lathe
SANFLEX-8

3(2+1) axes simultaneous control gang turret complex turning machine.
The spindle of the 2 axes simultaneous control gang turret lathe is controlled by Y axis.
Complete symmetrically designed machine.
On the symmetric structure, the spindle of built-in motor is mounted and on the platform can come multi-tool rest, multistage honey comb tool holder, rotary spindle, grinding units ,etc.
the best suited machine can be built by selection or combination of these tools.

 

Specifications

 
Item Description
Capacity   Max.φ60×80
Spindle Speed min-1 6,000
Spindle nose   φ75 Flat type
Type of collet EDA-8
Slide Type   2+1 axes Vertical linear turret
Travel mm X axis:300
mm Y axis:200
mm Z axis:250
Rapid traverse m/min X axis:25
m/min Y axis:8
m/min Z axis:20
Number of tools   According to the works
Motor Spindle kw 2.2
NC contril unit     FANUC 0i-TF
→Machine motion picture
→Machining motion picture
→Catalogs

PAGE TOP